Humminbird 967c Combo Fish Finder GPS 3D Sonar and GPSHumminbird 967c 3D Combo displays underwater images in 3-D or 2-D by using an array of transducer elements which scan 53° from side to side and 16° from front to back. Ample display resolution renders the 3-D images and gives the boat fisherman a 3-D view of what's going on underneath the boat. Expand GPS mapping by adding map upgrades through two memory slots.
Display This full-size display measures 8 inches diagonally. It displays three-dimensional images in much-needed high-resolution color of 480 vertical pixels by 800 horizontal pixels. Turn on the backlight when night fishing.
Fish Finder An array of six transducer elements covers 53° from side to side, and 16° from front to back to display three-dimensional results. High frequency 455 kHz signals are used to provide the best definition in 3-D and reach a maximum depth of 240 feet. 455 kHz and an 83 kHz beams provide standard two-dimensional sonar graphs. The 83 kHz beam allows depth readings of up to 1000 feet or 330 m with lower signal definition.
Fish Finder Features This Fish finder is equipped with dual microprocessors and dual sonar transmitters. Real-time-sonar updates at up to 40 times per second. Pause the sonar display to analyze more closely and zoom up to four levels. A water surface temperature sensor is built into the transducer. A speed paddlewheel is included. Add optional 200 and 50 kHz transducer for greater depth capability. Optimize for freshwater and saltwater settings.
This is a Humminbird fishing system which can be added to Humminbird network sensors, which include the award-winning CanonLink downrigger controller and monitor.
GPS Receiver The external GPS scans up to 16 channels for GPS signals and WAAS and EGNOS signals.
Memory Two memory card slots accept third-party maps and record readings.
Built In Maps A built-in map of the US coastal area and a land waterways is included. This map is displayed as 30 m per pixel or about 100 feet per pixel.
GPS Features View your position in a 3-D chart plotter and on a split screen. This unit is compatible with third-party maps like Navionics platinum. Tide and Port services can be added too.
Installation 10 to 20 Post DC is required to power the unit. When mounted the unit will measure 11 1/4 inches wide by 6 3/4 inches high by a 4 1/4 inches deep. |