Eagle SeaFinder 250 DF Fish Finder Dual-Frequency SonarThe SeaFinder 250 DF is a low cost dual frequency fish finder for saltwater use or downrigger tracking. Deepwater readings are more easily interpreted through the high detail resolution screen.
Display
This depth finder has a monochrome display with four levels of grayscale and is 4.5 inches when measured diagonally. The screen resolution is 240 vertical pixels by 240 horizontal pixels. The screen and keypad are backlit.
Fish Finder
This SeaFinder unit has an output frequency of 50 kHz and 200 kHz and uses a dual frequency Skimmer transducer. A temperature sensor is built into the transducer. It has a power output of 2400 W peak to peak and 300 W RMS it has a max depth capability of 1300 feet or 396 m on the 50 kHz frequency. Maximum depth capability depends on water conditions, Fish finder settings, and transducer installation.
Features
When the unit is turned off internal memory is set to remember current sonar settings to be ready for the next fish finding expedition. There are 11 selectable languages to choose from. This depth finder continuously displays fish activity and bottom structure. Auto bottom tracking can be switched on to casually monitor goings-on on the lake or ocean floor. A zoom option is included to further analyze returning signals using the split screen view. A surface water temperature sensor is built into the included transducer.
Installation
10 to 17 V DC are required to power this device. The specified current drain is 110ma with the light off and 250ma with the light on. The case size is 5.4 inches high by 6.9 inches wide by 3.4 inches deep. The cases specified waterproof and suitable for saltwater.
Fish Finder Models
With included transducer to standard product number is #110-78. |
